- Methodology article
- Open Access
Improving metabolic flux predictions using absolute gene expression data
BMC Systems Biology volume 6, Article number: 73 (2012)
Constraint-based analysis of genome-scale metabolic models typically relies upon maximisation of a cellular objective function such as the rate or efficiency of biomass production. Whilst this assumption may be valid in the case of microorganisms growing under certain conditions, it is likely invalid in general, and especially for multicellular organisms, where cellular objectives differ greatly both between and within cell types. Moreover, for the purposes of biotechnological applications, it is normally the flux to a specific metabolite or product that is of interest rather than the rate of production of biomass per se.
An alternative objective function is presented, that is based upon maximising the correlation between experimentally measured absolute gene expression data and predicted internal reaction fluxes. Using quantitative transcriptomics data acquired from Saccharomyces cerevisiae cultures under two growth conditions, the method outperforms traditional approaches for predicting experimentally measured exometabolic flux that are reliant upon maximisation of the rate of biomass production.
Due to its improved prediction of experimentally measured metabolic fluxes, and of its lack of a requirement for knowledge of the biomass composition of the organism under the conditions of interest, the approach is likely to be of rather general utility. The method has been shown to predict fluxes reliably in single cellular systems. Subsequent work will investigate the method’s ability to generate condition- and tissue-specific flux predictions in multicellular organisms.
The applications of genome-scale metabolic modelling have increased over recent years, as have the number of metabolic models available and the diversity of organisms that such reconstructions cover . Traditional approaches to analysing such models have focused on constraint-based modelling, including widely used techniques such as flux balance analysis (FBA) . FBA relies upon specification of an objective function that the cell is assumed to optimise. Objective functions can cover a range of cellular objectives , such as maximisation / minimisation of ATP consumption, but frequently (and particularly in the case of microorganisms) take the form of an assumed “biomass” function; a hypothetical reaction that mimics cell growth rate . Such a biomass function is used to account for the flow of materials that are necessary for building new cells, and is commonly required in constraint-based models even when maximising variables other than growth rate.
Maximisation of biomass yield is not generally considered a valid principle in microbiology ; however, it is commonly assumed to be the optimality criterion driving the evolution of microorganisms . The premise is that an organism that acquires and/or redistributes resources to outgrow its competitors will be in the best position to survive [7, 8]. Assumption of growth rate maximisation in FBA studies has led to successful predictions of the actual growth rate in a number of organisms [4, 9]. Such an assumption, however, is likely to be invalid for individual cell types in multicellular organisms, where cellular objectives may differ greatly both between and within tissues. The assumption of maximal rates of biomass production involves an objective at the cellular level, whereas in multicellular organisms a given cell’s objective is likely to be realised via survival at the organism level, which may not necessarily be dependent upon the growth of the cell. Moreover, signals from the extracellular environment may trigger different cellular priorities and objectives. These issues have been demonstrated by the work of Gille et al. , who modelled the metabolism of human hepatocyte, indicating their objective is to preserve homeostasis of blood compounds, a process that is modulated by the extracellular availability of oxygen and other nutrients.
Another concern when applying FBA is the inadequacy of the biomass definition itself. Typically, the assumed composition of E. coli is used as a template to define the biomass of the organism of interest . To do this, a cell’s macromolecular composition (in terms of protein, RNA, DNA, carbohydrate and lipid content), the metabolite content of each macromolecular class, and the biosynthetic and maintenance costs for various cellular processes are required . Not only are such numbers difficult to determine, but it is also to be expected that they would change drastically under different environmental conditions. Problems associated with reliance on a biomass objective function have led to a number of studies that focus on the determination of a suitable objective function [10–12].
This work therefore focuses on another approach, investigating the use of ‘omics data to act as a guide for the prediction of the intracellular metabolic fluxes that a given cell exhibits. A priori it may be supposed that enzymatic transcript concentrations and metabolic fluxes can be related to each other, albeit in a complex manner, since fluxes are clearly dependent on the concentrations of enzymes and/or their encoding transcripts . Drawing upon previous work [14–17], this approach investigates how relating metabolic fluxes to enzyme-encoding gene expression levels affects the predictive power of constraint-based analysis. The hypothesis is that doing so would provide a comparable, or better, representation of intracellular fluxes than does reliance upon an assumed biomass objective alone. As stated in related work by Becker et al. , “the statement of an [assumed] objective introduces a ‘user-bias’ and such objective may not be relevant to the true physiological state.” It is the removal of this user-bias, through the application of a purely data-driven objective, that this work attempts to address.
This study involves the acquisition and analysis of absolute quantitative transcriptomics data from Saccharomyces cerevisiae, and the subsequent use of these data to constrain an existing genome-scale metabolic model . A comparison between FBA results generated through this approach and those generated from applying a more traditional biomass objective is performed.
Such an approach may have ramifications for the genome-scale modelling of human metabolism , where tissue-specific microarray data are publicly available and have been exploited in the development of tissue-specific models of human metabolism by Shlomi et al. . The approach of Shlomi et al. categorises numerous tissue-specific relative gene expression data sets into high, medium and low expression, with the goal of limiting the tissue-specific network to contain only those reactions for which consistent high gene expression has been observed. A disadvantage of this work is that it was performed upon a “consensus” of gene expression data, generated under a range of physiological and experimental conditions. Furthermore, the data used are generated from microarrays, which provide relative expression ratios of the same gene under different conditions. Microarrays are applicable to comparative studies, and as such, the data that they produce do not allow for comparison of absolute expression levels across genes, primarily due to differences in hybridisation efficiency . In addition, microarray data is associated with a number of common problems, including cross-hybridisation issues, limited dynamic detection range, presence of background noise and the detection of transcripts being limited to sequences printed on the array .
The approach provided here relies upon absolute gene expression data generated under the condition of interest, using RNA-Seq. RNA-Seq provides expression levels in terms of counts of expressed transcripts that can be related to transcripts per cell and thus an absolute level. Therefore, the expression levels generated are comparable across the transcriptome and have been shown to be more indicative of protein concentrations than gene expression levels generated from microarrays [21, 23]. By extension, RNA-Seq data is likely to provide a more reliable indication of enzymatic activity than that generated through relative expression techniques. Furthermore, RNA-Seq mitigates many of the limitations inherent in the use of microarrays .
Results and discussion
The methodology involves a number of steps. Specifically, these are i) providing gene-protein-reaction (GPR) relationships in the metabolic model; ii) mapping of gene expression data to individual reactions; iii) correlating gene expression data to the predicted metabolic flux; and iv) validating the metabolic flux predictions through comparison of predicted values against those determined experimentally. It is important to note that the model is not constrained with experimentally measured flux parameters. These values are subsequently used to validate the flux predictions generated solely from gene expression data. The steps involved in the method are described in detail below and summarised in Figure 1.
Mapping gene expression data to metabolic reactions
Previous approaches to applying gene-level data to metabolic maps have involved thresholding; the gene can be defined as having two states: on or off , or three states: low, medium or high expression . Here a different approach is used, where the absolute gene expression data are used to create continuous, rather than discrete, reaction weightings.
The method is applied to the genome-scale model of yeast metabolism, Yeast 5 , an extension of earlier community-driven yeast metabolic reconstructions [24, 25]. RNA-Seq data are used to constrain the reconstruction, providing an absolute measurement of gene expression that is comparable across all genes in the data set. The hypothesis is that absolute and comparable measurements of gene expression can be used to infer activity of the encoded enzymes. Although it is recognised that there is overall poor correlation between gene and protein expression , recent studies have indicated an increased correlation between mRNA and protein concentrations than was reported previously [23, 27]. The assumption behind the method is that gene expression levels can be used to infer metabolic fluxes with reasonable accuracy, provided that they are applied on a genome-scale, and provided that the predicted metabolic flux pattern adheres to the normal stoichiometric and thermodynamic constraints that are applied to constraint-based modelling. By applying gene expression levels on such a scale, and by adhering to such constraints, it is hoped that effects such as experimental error, differing protein translation rates, differing transcript and protein stabilities, and differing enzymatic activities, will be reduced. Whilst the procedure is here applied to transcriptomics data, future work will investigate whether the method would be improved by integration with absolute proteomics data .
The assignment of gene expression data to individual metabolic reactions is complicated by the fact that there is not a one-to-one mapping between gene and reaction. The presence of promiscuous enzymes , isoenzymes and enzymatic complexes underscores the requirement for a careful mapping of gene expression data to metabolic reactions. Details of the approach undertaken here are provided in the Methods section.
From metabolic reactions to flux predictions
The basic biochemical structure of the metabolic pathways is generally of sufficient granularity to allow deduction of the underlying network stoichiometry. In addition, the flux of each reaction through the system may be constrained through, for example, knowledge of enzyme maximal activities (v max ) or irreversibility considerations . Given a typical genome-scale metabolic model such as Yeast 5, at steady state these constraints may be written as:
where N is the stoichiometric matrix, v a steady state flux pattern, and L i and U i the lower and upper flux bounds respectively for each reaction i.
A number of techniques have been proposed to deduce the network behaviour from this minimal set of information, including FBA and extreme pathway  or elementary mode analysis . In particular, FBA highlights the most effective and efficient paths through the network in order to optimise a particular objective function . Genome-scale reconstructions typically contain a pseudoreaction representing growth (a “biomass reaction”) and FBA is typically used to identify a pattern of fluxes at steady state that maximise the rate of this reaction. This is seen as corresponding to maximising the rate of biomass production with respect to a nutrient of reference (usually glucose), with other necessary nutrients assumed to be in excess. This is unlikely to be applicable to turbidostat cultures where growth rates are maximised but where their efficiencies in terms of mass of cells per mass of glucose may be low.
In this study, the rate of biomass production is not the function that is maximised explicitly. Instead, the focus is on maximising the correlation between the steady-state pattern of the predicted fluxes and the corresponding gene expression data at the biochemical level. This is achieved through minimising:
where the sum is taken over all reactions i for which reaction data d i are available, in this case, all reactions with an associated gene. σ i is the error in data point i as calculated in the mapping of gene expression data to individual reactions (see Methods). Thus the objective is to predict a flux that is as close as possible to the reaction estimate, weighted according to the confidence in that estimate. The function Z is convex in v, and this allows the use of the powerful tools of convex programming . Convexity is normally required to solve optimisation problems involving thousands of variables and is certainly to be preferred from the point of view of computational performance. This is the reason that a possibly more natural function such as the Pearson product-moment correlation coefficient is not used in its place. Moreover, Z may be linearised through decomposing v into components greater than, or less than, d:
for each i. Hence the fast and robust tools of linear programming  may be utilised.
One remaining problem is that the direction of reversible reactions (defined operationally as those whose net fluxes may be in either direction in the organism of interest) is potentially arbitrary. The aim is to maximise correlation between the absolute flux and reaction data, but replacing v with |v| in the definition of Z would remove its convexity. Instead, an iterative process is used to assign the data to the model:
Maximise the correlation between the initial set of irreversible reactions and the experimental data. The sum in Z is taken only over irreversible reactions (i.e. those with a known direction of flux).
Perform flux variability analysis (FVA)  to determine which further reactions in the network must thus be unidirectional, i.e. they cannot carry a flux in the other direction without decreasing the correlation coefficient found in point 1.
A new larger set of irreversible reactions is defined. The cycle between FVA and maximising correlation is continued until no extra irreversible reactions are found through variability analysis. As the number of irreversible reactions will never decrease, the algorithm terminates in a finite number of steps.
Comparison of predicted and measured exometabolome fluxes
Fluxes were predicted by following two approaches: standard FBA (i.e. maximisation of cellular biomass), and maximisation of the correlation between specific metabolic fluxes and gene expression data, as described here. In the latter case, gene expression data were collected under two growth conditions: at 75% and 85% of the maximum biomass levels attainable for this strain with the utilised growth medium. In general FBA problems are underdetermined, i.e. there is an infinite number of solutions satisfying the criterion of optimality. The innumerable set of these equally optimal solutions is known as the solution space and is in the shape of a multi-dimensional polytope. Different algorithms have been proposed to explore the solution space of an FBA problem and enumerate its edges (the alternate optima) [33, 39]. The approach followed here is to identify one single solution for each FBA formulation that is representative of the entire solution space. This is achieved by applying geometric FBA, a method that identifies the FBA solution that lies in the centre of the solution space .
The exometabolome or “metabolic footprint” of an organism provides a quick and convenient summary of its metabolic activities, especially under unbalanced growth conditions [41, 42]. The predicted exometabolome fluxes from both methods were compared against experimentally measured fluxes. The coefficient of determination R2 was used to test the goodness of fit of the predictions; R2 = 1 means a perfect match between model and data, whilst R2 = 0 is the value obtained by simply predicting the mean of the data for each point. Thus R2 < 0 denotes a very poor prediction.
The results for the flux to exit of six metabolites - carbon dioxide, ethanol, glycerol, acetate, lactate and trehalose - are presented in Tables 1 and 2. These exchange fluxes were normalised according to the measured glucose uptake flux of their respective growth condition. The standard FBA method of maximising growth predicts that all glucose is converted to carbon dioxide, and provides a very poor fit to the data (R2 < 0). The best fit possible under the assumption of maximal biomass prediction is R2 = 0.20 and R2 = 0.58, respectively. In contrast, a good fit is found by applying the method described here to gene expression data gathered at both the 75% and 85% biomass level R2 = 0.87 and R2 = 0.96, respectively).
It is recognised that the gene expression correlation method failed to predict glycerol transport at the 75% maximal biomass level, and underestimates this at the 85% maximal biomass level. Furthermore, acetate exchange is underestimated under both conditions. However, the gene expression method is capable of predicting low-level exometabolic fluxes of lactate and trehalose, and it is noticed that existing methods also investigated (GIMME  and iMAT ) did not predict anything other than carbon dioxide excretion when applied to the same model and gene expression data.
In this paper, a methodology for using absolute quantitative gene expression data to predict genome-scale flux patterns has been defined. Unlike standard constraint-based analysis approaches such as biomass maximisation, this method is able to provide accurate predictions of the major exometabolome fluxes in Saccharomyces cerevisiae under the measured experimental conditions.
Both transcriptome and exometabolome data from steady state cultures grown under specific conditions of interest are generated. The acquisition of data from defined and controlled cultures allows the direct comparison of the two data sets. The relatively easy generation of data - commercial kits were used to extract the RNA from the cell - negates the need to use a “consensus” set of publicly available transcriptomics data. Moreover, with calibration it allows for absolute quantification, rather than the use of relative values as typically output in microarray experiments. Advancements in analytical technologies within the metabolomics field and the development of defined methodologies and tools have facilitated the generation of robust and reproducible data for systems biology studies.
The method described here does not rely on the definition, and assumed maximisation, of a biomass function that is often uncertain and necessarily depends on the specific growth conditions. It is notable that the proposed approach provides prediction of exometabolome fluxes under two growth conditions, whereas the standard FBA formulation provides a single prediction that is unable to distinguish between conditions. Tailoring the standard FBA approach to deal with different growth conditions would require the specification of individual biomass functions for each condition. This time-consuming task requires knowledge of the cell composition and energetic requirements under the growth condition of interest. The approach described here thus provides an easier means of determining metabolic fluxes under a range of conditions than relying on the standard method of biomass maximisation.
The gene expression constraining approach can also be considered as a filter: given that the experimental data can be taken as representative of the fluxes, the random errors associated with such data should cancel out at a genome-wide level. Because the FBA solution needs to satisfy the steady-state assumption, the predicted fluxes must be consistent with the mass conservation of each metabolite. If the topology of the network encompasses the whole system metabolism, the noise of the data should subside in favour of the real signal. Moreover it allows changes in ‘omics data from the perspective of their influence on the system as a whole to be viewed. Although transcriptomics data are not necessarily representative of the protein levels, their use in metabolic constraint-based modelling provides much better predictive power than does the standard FBA method. Specifically, the gene expression constrained method provides good fits to the measured flux to exit data at both 75% and 85% growth level R2 = 0.87 and R2 = 0.96 respectively), while the standard FBA method provides a much poorer fit.
Typically, gene knockouts are modelled under the assumption that there is no downstream effect on gene regulation, and that there is a minimum change at the flux level (for example using minimisation of metabolic adjustment (MoMA) ). Rather than simply making such an assumption, this work suggests a better approach would be to effect the (relatively easy) measurement of gene expression data after knockout, and subsequent use of this data to predict the new flux pattern. It is envisaged that the same approach could be used to retrieve flux patterns in cells under different physiological conditions, or during the progression of metabolic diseases such as cancer and diabetes. Furthermore, methods that predict exometabolomic fluxes are of particular use in ‘white’ biotechnology applications [44, 45].
Continuous cultures of Saccharomyces cerevisiae
Steady-state cultures of Saccharomyces cerevisiae (BY4743 hoΔ/HO, (YDL227C; MATa/MATα; his3Δ1/his3Δ1; leu2Δ0/leu2Δ0; met15Δ0/MET15; LYS2/lys2Δ0; ura3Δ0/ura3Δ0) were established using a permittistat approach [46, 47], in which the electrical capacitance of the culture was monitored by a probe inserted into the vessel connected to a Biomass Monitor 220 (Aber Instruments, UK). The cultures were grown in F1 media  with a working volume of 2l in a 3l vessel (Applikon Biotechnology, Netherlands). The bioreactors were operated at a temperature of 30°C, 650 rpm agitation control, pH 4.5 and 1.5 ml min-1 air supply, under the control of the operating software BioXpert (Applikon Biotechnology, Netherlands). A feedback loop was programmed to regulate the media pump and maintain the culture at the desired set point (either 75% or 85% of the maximum achievable biomass levels known for this strain in the growth media used). As usual in a turbidostat, the growth rate of the culture was at μmax and without nutrient limitation. Off-gas analysis of O2 and CO2 was measured using a tandem gas analyser (Magellan Instruments, Sweden). Further details of the experimental procedure are outlined in .
Samples were collected for transcriptome and exometabolome analysis from three independent (biological) replicates operated under identical conditions. The growth parameters turbidity (OD680nm), dry weight, culture purity, extracellular glucose concentration and total cell count (determined with a Cellometer Auto M10, Nexcelem Biosciences, USA) were monitored to assess the reproducibility of the replicates.
Generation and analysis of RNA-Seq data
The RNA was extracted from the Saccharomyces cerevisiae samples using a RiboPure yeast kit (Ambion Life Sciences, USA). Total RNA samples were depleted of abundant ribosomal RNA molecules using the RiboMinus eukaryote kit for RNA-Seq (Invitrogen, USA). The RNA transcripts were converted into a cDNA library using the SOLiD total RNA-Seq Kit (Applied Biosystems, USA). Analysis of the library was performed using a SOLiD sequencing system (Applied Biosystems, USA) for the whole transcriptome library, generating millions of short reads of sequence. Counts for each transcript were generated by first aligning sequence reads were aligned onto a yeast reference genome (SGD/sacCer2 assembly, downloaded 09/02/2011 from the UCSC Genome Browser ) using Bowtie, version 0.12.7 . After alignment, the Cufflinks algorithm , version 1.02, was employed to infer the gene transcripts most likely present according to the aligned reads. Once assigned to their most likely source genes, Cufflinks was employed to calculate transcript abundance in terms of RPKM , an estimate of transcript counts normalised both locally (according to the length of the assigned transcript) and globally (the number of total mapped reads per million).
Generation and analysis of exometabolome data
Exometabolome samples were collected by syringe filtration (0.2μm pore filter) of the culture to rapidly remove the biomass from the culture. The resulting filtrate was snap-frozen in liquid nitrogen for further analysis. The concentrations of acetate and ethanol were performed by enzymatic assays (Megazyme, Ireland). Gas chromatography mass spectrometry (GC-MS) quantified the remaining metabolites detected in the exometabolome. The chromatographic peak areas for the metabolites detected in the samples were compared to an externally constructed calibration curve. A stock solution containing glycerol, trehalose, glucose and fructose was prepared at a concentration of 10 mmol l-1. The stock solution was serially diluted to provide calibration standards in the range of 0.1-1000 μmol l-1. Aliquots of the calibration standards and exometabolome samples were lyophilised (HETO VR MAXI vacuum centrifuge attached to a RVT4104 cooling trap; Thermo Life Sciences, UK).
The lyophilised samples and standards were derivatised for GC-MS analysis. An aliquot (50μl 20 mgml-1O-methylhydroxylamine solution was added to each sample and heated at 40°C for 90 minutes. 50μl N-acetyl-N-(trimethylsilyl)-trifluoroacetamide (MSTFA) was added to the samples and heated at 40°C. Samples were analysed on an Agilent 6890N gas chromatograph and 7683 autosampler (Agilent Technologies, UK) coupled to a LECO Pegasus III electron impact time-of-flight mass spectrometer (LECO Corporation, USA). 1μl of the sample was rapidly introduced in to an injector operating at 250°C, with a split ratio of 1:10 and a helium flow rate of 0.8ml min-1 in constant flow mode. Metabolites were separated on a SPB50 phase column (30m x 0.25mm x 0.25μm; Supelco, UK) with a 50 min temperature gradient (initial temperature of 70°C was held for 4 min followed by a 5°C min-1 temperature ramp to 290°C which was held constant for 2 min). The chromatographic eluent was introduced to an electron impact mass spectrometer. The transfer line and ion source temperatures were 250°C. Mass spectral data was acquired in the range 70-600 Da with an acquisition rate of 10Hz. Processing of the raw data was performed with LECO ChromaTof v2.25 software to construct a data matrix (metabolite peak vs. sample number) including the chromatographic peak areas. Calibration curves were constructed for each metabolite to determine the concentration of the metabolites in the exometabolome samples.
Carbon balancing was achieved to 97% and 95% for the 75% and 85% maximum achievable biomass growth conditions, respectively [see Additional file 1 – exometabolomics.xls].
Mapping gene expression data to metabolic reactions
The model, Yeast 5, is encoded and distributed in the Systems Biology Markup Language (SBML) . Following the conventions implemented by many genome-scale metabolic models , many reactions in Yeast 5 are associated with genes and proteins via gene-protein-reaction (GPR) associations: Boolean statements connecting genes to reactions. For example, reaction r_0003 ((R,R)-butanediol dehydrogenase) is annotated with:
Given this simple mapping from gene to reaction, the gene expression count of YAL060W = 0.0152 ± 0.00757 can be used to directly give a reaction weighting of r_0003 = 0.0152 ± 0.00757.
However, in general, GPR associations are not so simple, and there is a many-to-many mapping from gene to reaction. For example, reaction r_0250 (carbamoyl phosphate synthase) is annotated as:
GENE_ASSOCIATION: (YJR109C and YOR303W) or YJL130C
with associated gene expression data YJR109C = 0.156 ± 0.083, YOR303W = 0.0976 ± 0.033 and YJL130C = 0.126 ± 0.013. Consider first the Boolean AND relationship above; this means that the reaction is catalysed by a complex between the two gene products. Since the maximum complex concentration is given by the minimum concentration of its components, the weighting of the complex is defined as:
YJR109C:YOR303W = min(YJR109C,YOR303W) = 0.0976 ± 0.033
The OR relationship allows for alternative catalysts to each reaction; as such the total capacity is given by the sum of its components, so:
r_0250 = YJR109C:YOR303W + YJL130C = 0.224 ± 0.035
Note that the standard deviation above is estimated through the assumption that the variables are uncorrelated, allowing variances to be added.
All scripts required to map gene expression data to a metabolic model, and to generate flux predictions from the model are available as additional files. In addition, the metabolic model Yeast 5 and the experimental gene expression data used in this study are provided as additional files. The Cobra Toolbox for Matlab  is required to run the scripts. Results generated in this study used the Gurobi Optimizer 4.5.1 linear solver (Gurobi Optimization, USA).
Oberhardt MA, Palsson BØ, Papin JA: Applications of genome-scale metabolic reconstructions. Mol Syst Biol 2009, 5: 320.
Orth JD, Thiele I, Palsson BØ: What is flux balance analysis? Nat Biotechnol 2010, 28: 245-248. 10.1038/nbt.1614
Schuetz R, Kuepfer L, Sauer U: Systematic evaluation of objective functions for predicting intracellular fluxes in Escherichia coli. Mol Syst Biol 2007, 3: 119.
Feist AM, Palsson BØ: The biomass objective function. Curr Opin Microbiol 2010, 13: 344-349. 10.1016/j.mib.2010.03.003
Schuster S, Pfeiffer , Fell DA: Is maximization of molar yield in metabolic networks favoured by evolution? J Theor Biol 2008, 252: 497-504. 10.1016/j.jtbi.2007.12.008
Pramanik J, Keasling JD: Stoichiometric model of Escherichia coli metabolism: incorporation of growth-rate dependent biomass composition and mechanistic energy requirements. Biotechnol Bioeng 1997, 56: 398-421. 10.1002/(SICI)1097-0290(19971120)56:4<398::AID-BIT6>3.0.CO;2-J
Gille C, Bölling C, Hoppe A, Bulik S, Hoffmann S, Hübner K, Karlstädt A, Ganeshan R, König M, Rother K, Weidlich M, Behre J, Holzhütter HG: HepatoNet1: a comprehensive metabolic reconstruction of the human hepatocyte for the analysis of liver physiology. Mol Syst Biol 2010, 6: 411.
Westerhoff HV, Hellingwerf KJ, Van Dam K: Thermodynamic efficiency of microbial growth is low but optimal for maximal growth rate. Proc Natl Acad Sci U S A 1983, 80: 305-309. 10.1073/pnas.80.1.305
Varma A, Palsson BØ: Stoichiometric flux balance models quantitatively predict growth and metabolic by-product secretion in wild-type Escherichia coli W3110. Appl Environ Microbiol 1994, 60: 3724-3731.
Burgard AP, Maranas CD: Optimization-based framework for inferring and testing hypothesized metabolic objective functions. Biotechnol Bioeng 2003, 82: 670-677. 10.1002/bit.10617
Gianchandani EP, Oberhardt MA, Burgard AP, Maranas CD, Papin JA: Predicting biological system objectives de novo from internal state measurements. BMC Bioinforma 2008, 9: 43. 10.1186/1471-2105-9-43
Kumar VS, Maranas CD: GrowMatch: an automated method for reconciling in silico/in vivo growth predictions. PLoS Comput Biol 2009, 5: e1000308. 10.1371/journal.pcbi.1000308
Kell DB, Westerhoff HV: Metabolic control theory: its role in microbiology and biotechnology. FEMS Microbiol Rev 1986, 39: 305-320. 10.1111/j.1574-6968.1986.tb01863.x
Shlomi T, Cabili MN, Herrgård MJ, Palsson BØ, Ruppin E: Network-based prediction of human tissue-specific metabolism. Nat Biotechnol 2008, 26: 1003-1010. 10.1038/nbt.1487
Chandrasekaran S, Price ND: Probabilistic integrative modeling of genome-scale metabolic and regulatory networks in Escherichia coli and Mycobacterium tuberculosis. Proc Natl Acad Sci USA 2010, 107: 17845-17850. 10.1073/pnas.1005139107
Cakir T, Kirdar B, Ulgen KO: Metabolic pathway analysis of yeast strengthens the bridge between transcriptomics and metabolic networks. Biotechnol Bioeng 2004, 86: 251-260. 10.1002/bit.20020
Cakir T, Patil KR, Onsan Z, Ulgen KO, Kirdar B, Nielsen J: Integration of metabolome data with metabolic networks reveals reporter reactions. Mol Syst Biol 2006, 2: 50.
Becker SA, Palsson BO: Context-specific metabolic networks are consistent with experiments. PLoS Comput Biol 2008, 4: e1000082. 10.1371/journal.pcbi.1000082
Heavner BD, Smallbone K, Barker B, Mendes P, Walker LP: Yeast 5 - an Expanded Reconstruction of the Saccharomyces Cerevisiae Metabolic Network. BMC Syst Biol 2012, 6: 55. 10.1186/1752-0509-6-55
Duarte NC, Becker SA, Jamshidi N, Thiele I, Mo ML, Vo TD, Srivas R, Palsson BØ: Global reconstruction of the human metabolic network based on genomic and bibliomic data. Proc Natl Acad Sci USA 2007, 104: 1777-1782. 10.1073/pnas.0610772104
Fu X, Fu N, Guo S, Yan Z, Xu Y, Hu H, Menzel C, Chen W, Li Y, Zeng R, Khaitovich P: Estimating accuracy of RNA-Seq and microarrays with proteomics. BMC Genomics 2009, 10: 161. 10.1186/1471-2164-10-161
Wang Z, Gerstein M, Snyder M: RNA-Seq: a revolutionary tool for transcriptomics. Nat Rev Genet 2009, 10: 57-63. 10.1038/nrg2484
Ning K, Fermin D, Nesvizhskii AI: Comparative Analysis of Different Label-Free Mass Spectrometry Based Protein Abundance Estimates and Their Correlation with RNA-Seq Gene Expression Data. J Proteome Res 2012, 11: 2261-71. 10.1021/pr201052x
Herrgård MJ, Swainston N, Dobson P, Dunn WB, Arga KY, Arvas M, Blüthgen N, Borger S, Costenoble R, Heinemann M, Hucka M, Le Novère N, Li P, Liebermeister W, Mo ML, Oliveira AP, Petranovic D, Pettifer S, Simeonidis E, Smallbone K, Spasić I, Weichart D, Brent D, Broomhead DS, Westerhoff HV, Kırdar B, Penttilä M, Klipp E, Palsson BØ, Sauer U, Oliver SG, Mendes P, Nielsen J, Kell DB: A consensus yeast metabolic network reconstruction obtained from a community approach to systems biology. Nat Biotechnol 2008, 26: 1155-1160. 10.1038/nbt1492
Dobson PD, Smallbone K, Jameson D, Simeonidis E, Lanthaler K, Pir P, Lu C, Swainston N, Dunn WB, Fisher P, Hull D, Brown M, Oshota O, Stanford NJ, Kell DB, King RD, Oliver SG, Stevens RD, Mendes P: Further developments towards a genome-scale metabolic model of yeast. BMC Syst Biol 2010, 4: 145. 10.1186/1752-0509-4-145
Gygi SP, Rochon Y, Franza BR, Aebersold R: Correlation between protein and mRNA abundance in yeast. Mol Cell Biol 1999, 19: 1720-30.
Lee MV, Topper SE, Hubler SL, Hose J, Wenger CD, Coon JJ, Gasch AP: A dynamic model of proteome changes reveals new roles for transcript alteration in yeast. Mol Syst Biol 2011, 7: 514.
Carroll KM, Simpson DM, Eyers CE, Knight CG, Brownridge P, Dunn WB, Winder CL, Lanthaler K, Pir P, Malys N, Kell DB, Oliver SG, Gaskell SJ, Beynon RJ: Absolute quantification of the glycolytic pathway in yeast: deployment of a complete QconCAT approach. Mol Cell Proteomics 2011, 10: M111.007633. 10.1074/mcp.M111.007633
Aharoni A, Gaidukov L, Khersonsky O, McQ Gould S, Roodveldt C, Tawfik DS: The 'evolvability' of promiscuous protein functions. Nat Genet 2005, 37: 73-76.
Covert MW, Famili I, Palsson BØ: Identifying constraints that govern cell behavior: A key to converting conceptual to computational models in biology? Biotechnol Bioeng 2003, 84: 763-772. 10.1002/bit.10849
Price ND, Reed JL, Palsson BØ: Genome-scale models of microbial cells: Evaluating the consequences of constraints. Nat Rev Microbiol 2004, 2: 886-897. 10.1038/nrmicro1023
Murabito E, Simeonidis E, Smallbone K, Swinton J: Capturing the essence of a metabolic network: a flux balance analysis approach. J Theor Biol 2009, 260: 445-452. 10.1016/j.jtbi.2009.06.013
Schilling CH, Letscher D, Palsson BØ: Theory for the systemic definition of metabolic pathways and their use in interpreting metabolic function from a pathway-oriented perspective. J Theor Biol 2000, 203: 229-248. 10.1006/jtbi.2000.1073
Schuster S, Fell DA, Dandekar T: A general definition of metabolic pathways useful for systematic organization and analysis of complex metabolic networks. Nat Biotech 2000, 18: 326-332. 10.1038/73786
Kauffman KJ, Prakash P, Edwards JS: Advances in flux balance analysis. Curr Opin Biotechnol 2003, 14: 491-496. 10.1016/j.copbio.2003.08.001
Rochafellar RT: Convex analysis. Princeton University Press; 1970.
Dantzig GB: Linear Programming and Extensions. Princeton University Press; 1963.
Mahadevan R, Schilling CH: The effects of alternate optimal solutions in constraint-based genome-scale metabolic models. Metab Eng 2003, 5: 264-276. 10.1016/j.ymben.2003.09.002
Lee S, Phalakornkule C, Domach MM, Grossmann IE: Recursive MILP model for finding all the alternate optima in LP models for metabolic networks. Comput Chem Eng 2000, 24: 711-716. 10.1016/S0098-1354(00)00323-9
Smallbone K, Simeonidis E: Flux balance analysis: a geometric perspective. J Theor Biol 2009, 258: 311-315. 10.1016/j.jtbi.2009.01.027
Allen J, Davey HM, Broadhurst D, Heald JK, Rowland JJ, Oliver SG, Kell DB: High-throughput classification of yeast mutants for functional genomics using metabolic footprinting. Nat Biotechnol 2003, 21: 692-696. 10.1038/nbt823
Kell DB, Brown M, Davey HM, Dunn WB, Spasic I, Oliver SG: Metabolic footprinting and systems biology: the medium is the message. Nat Rev Microbiol 2005, 3: 557-565. 10.1038/nrmicro1177
Segrè D, Vitkup D, Church GM: Analysis of optimality in natural and perturbed metabolic networks. Proc Natl Acad Sci U S A 2002, 99: 15112-15117. 10.1073/pnas.232349399
Park JH, Lee SY, Kim TY, Kim HU: Application of systems biology for bioprocess development. Trends Biotechnol 2008, 26: 404-412. 10.1016/j.tibtech.2008.05.001
Lee JW, Kim TY, Jang YS, Choi S, Lee SY: Systems metabolic engineering for chemicals and materials. Trends Biotechnol 2011, 29: 370-378. 10.1016/j.tibtech.2011.04.001
Davey HM, Davey CL, Woodward AM, Edmonds AN, Lee AW, Kell DB: Oscillatory, stochastic and chaotic growth rate fluctuations in permittistatically-controlled yeast cultures. Biosystems 1996, 39: 43-61. 10.1016/0303-2647(95)01577-9
Markx GH, Davey CL, Kell DB: The permittistat: a novel type of turbidostat. J Gen Microbiol 1991, 137: 735-743. 10.1099/00221287-137-4-735
Winder CL, Lanthaler K: The use of continuous culture in systems biology investigations. Methods Enzymol 2011, 500: 261-275.
Dreszer TR, Karolchik D, Zweig AS, Hinrichs AS, Raney BJ, Kuhn RM, Meyer LR, Wong M, Sloan CA, Rosenbloom KR, Roe G, Rhead B, Pohl A, Malladi VS, Li CH, Learned K, Kirkup V, Hsu F, Harte RA, Guruvadoo L, Goldman M, Giardine BM, Fujita PA, Diekhans M, Cline MS, Clawson H, Barber GP, Haussler D, James Kent W: The UCSC Genome Browser database: extensions and updates 2011. Nucleic Acids Res 2012, 40: D918-23. 10.1093/nar/gkr1055
Langmead B, Trapnell C, Pop M, Salzberg SL: Ultrafast and memory-efficient alignment of short DNA sequences to the human genome. Genome Biol 2009, 10: R25. 10.1186/gb-2009-10-3-r25
Trapnell C, Williams BA, Pertea G, Mortazavi A, Kwan G, van Baren MJ, Salzberg SL, Wold BJ, Pachter L: Transcript assembly and quantification by RNA-Seq reveals unannotated transcripts and isoform switching during cell differentiation. Nat Biotechnol 2010, 28: 511-5. 10.1038/nbt.1621
Mortazavi A, Williams BA, McCue K, Schaeffer L, Wold B: Mapping and quantifying mammalian transcriptomes by RNA-Seq. Nat Methods 2008, 5: 621-8. 10.1038/nmeth.1226
Hucka M, Finney A, Sauro HM, Bolouri H, Doyle JC, Kitano H, Arkin AP, Bornstein BJ, Bray D, Cornish-Bowden A, Cuellar AA, Dronov S, Gilles ED, Ginkel M, Gor V, Goryanin II, Hedley WJ, Hodgman TC, Hofmeyr JH, Hunter PJ, Juty NS, Kasberger JL, Kremling A, Kummer U, Le Novère N, Loew LM, Lucio D, Mendes P, Minch E, Mjolsness ED, Nakayama Y, Nelson MR, Nielsen PF, Sakurada T, Schaff JC, Shapiro BE, Shimizu TS, Spence HD, Stelling J, Takahashi K, Tomita M, Wagner J, Wang J, SBML Forum: The systems biology markup language (SBML): a medium for representation and exchange of biochemical network models. Bioinformatics 2003, 19: 524-531. 10.1093/bioinformatics/btg015
Thiele I, Palsson BØ: A protocol for generating a high-quality genome-scale metabolic reconstruction. Nat Protoc 2010, 5: 93-121.
Schellenberger J, Que R, Fleming RM, Thiele I, Orth JD, Feist AM, Zielinski DC, Bordbar A, Lewis NE, Rahmanian S, Kang J, Hyduke DR, Palsson BØ: Quantitative prediction of cellular metabolism with constraint-based models: the COBRA Toolbox v2.0. Nat Protoc 2011, 6: 1290-307. 10.1038/nprot.2011.308
This work was supported by the EU FP7 through the UNICELLSYS project (grant 201142), the BBSRC and EPSRC through the Manchester Centre for Integrative Systems Biology (grant BB/C008219/1) and the Doctoral Training Centre ISBML (grant EP/F500009/1). The authors are grateful to Michael Howard, along with Leo Zeef, Andy Hayes and others at the Genomic Technologies Core Facility at the University of Manchester for the generation of the RNA-Seq data.
The authors declare that they have no competing interests.
NS conceived the idea and led the project. CW performed the continuous culture. DL and CW generated the gene expression data. WD generated the exometabolome results. DL, KS and EM developed and implemented the algorithm. KS produced the results. KS and NS developed the Matlab scripts. All authors read and approved the final manuscript.
Dave Lee, Kieran Smallbone contributed equally to this work.
Electronic supplementary material
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
About this article
Cite this article
Lee, D., Smallbone, K., Dunn, W.B. et al. Improving metabolic flux predictions using absolute gene expression data. BMC Syst Biol 6, 73 (2012) doi:10.1186/1752-0509-6-73
- Flux balance analysis
- Metabolic flux
- Metabolic networks